Pressure washing is one of the easiest and effortless cleaning methods. Most of us think that they can start spraying everything blindly and they will get the best results. If you’re one of those then stick around till the end. Many people wonder how long does it take to pressure wash a house. But you can finish this task in small time by following few tips.
There are so many things that can either multiply the results or decrease them. Without following the useful tips, you cannot get the best results. Only spraying the things with water cannot help you out. You have to consider so many things along with that.
Elevating the results of pressure washing has direct connection with tips and tricks that you follow during the process. We are going to represent you with some of the most effective tips so that you can change the whole look of your home.
What are we waiting for? Let’s have a glimpse of the details of the article.
- Clean the surface before starting the actual process:
Loose debris is the thing that we usually find everywhere. It’s better to clean it before directing the water towards it. It enhances the results to a very high extent.
If you pour the water on the dirty surface then it can lead to the formation of mud. Before digging into the actual process, sweep out all the loose debris.
This will help you to finish your work in a short time. Along With this, you won’t believe how magical effects this small tip can bring.
- Use cold water:
Warm water is not good for every surface. For some surfaces, you can use warm water. It can cause damage to delicate surfaces.
For this purpose, you will have to turn off warm water spigots in the pressure washer. Not only this but try to flush out some water before starting the process. Water gets hot due to the sun, therefore, it’s better to flush it out.
- Make sure that water is enough:
Pressure washing is a cleaning process that needs a lot of water. If the water supply is inadequate then you won’t be able to clean your whole house. And nothing can be worse than leaving the cleaning process in between. Am I right? Yeah, I am.
For this purpose, you have to check how sufficient water is. Pour it into the bucket. In this way, you will come to know how much water there is. If it’s not enough then you can delay the task.
- Don’t forget to do a patch test:
We have a great list of surfaces on which we can do pressure washing. But it is true that not every surface is made for this. You better know which place of your home can withstand the pressurized water.
Before starting the actual process, try to do a patch test first. Direct the stream of water towards the surface for a few seconds. And you will come to know how firm the surface is.
- Choose the right nozzles:
You can make your pressure washer a versatile tool by yourself. All you need is the great collection of nozzles.
You can keep on changing the nozzles for different surfaces. Nozzles come in great variety. So, you can select them according to the surface.
Nozzles are designed differently for every concentration. Nozzles that generate high concentrations should be used for firm surfaces.
You should use highly concentrated nozzles with great care. You can go for high degree nozzles for delicate surfaces.
Because a high degree means less concentration.
- Use the chemicals safely:
You may have to use harsh chemicals for stubborn stains on firm surfaces. But this needs a lot of care . It can spill back over you. So, don’t forget to put your safety first priority.
It’s better to use homemade cleaning mixtures. This is the safest way you can go.
- Use the right fuel:
By using the wrong type of fuel, you can destroy your pressure washer. In small engines, you cannot put a fuel that has more than 10% ethanol. This will negatively affect the functioning of your pressure washer. Gasoline should be checked before its addition into the tank.
- Always follow top to bottom technique:
This is one of the best time saving techniques. Just move the spray from top to bottom. In so many cases, you will not even have to pre-clean the surface. This simple technique cuts down the need for effort to a very high extent.
- Don’t direct the water for prolonged period:
Directing the water towards the same surface for a prolonged period not only damages the surface but also pushes the dirt deeper into it. Keep on changing the direction in order to avoid such a situation.
This will pull out the dirt immediately.
- Keep different nozzles:
Keep on changing the nozzles according to the surface. This is how you can work smartly. This saves a lot of your time. You cannot use the same nozzle for every surface because it does not produce the expected results.
- Make your own cleaner:
Homemade cleaner is the best thing to go for. It is not very harsh. So, you can use it for all types of surfaces. All you need to do is to add vinegar and detergent in a bucket of water. And you will be amazed by the results. I hope you’ve got the answer to the question what soap to use in pressure washer.
- Keep yourself safe:
Safety should be your top priority. Wear safety goggles to protect your eyes. Because anything can enter your eyes while cleaning.
Don’t forget to put on safety gloves. Some harsh surfaces can hurt your hands.
Try to stand in a stable position. Because it also exerts pressure in the backward direction. And if you are standing on a ladder then keep it in the right position.
The final thoughts!
Some small techniques can make you an expert in your cleaning process. Above-written article is the complete package of techniques that can help you regarding pressure washing. If you have not read it yet then just have a read and reap the benefits of pressure washing. Thanks for visiting and reading the article.
